Users' Forum
EQUIPMENT
Watch our systems in actionProduct videos on our YouTube channel

DNS-101

DNS-101 dual-solution electrospinning system

Spin Two Solutions at Once, Each Under Its Own Optimal Conditions

DNS-101 is an electrospinning machine with two independent sets of syringe pumps, spinnerets and high-voltage power supplies. It spins Solution A and Solution B at the same time, each under conditions suited to its properties, and produces a nonwoven in which the two types of fiber are mixed together.

Our specialist will reply by the next business day (Japan time).

A Nonwoven of Two Intermixed Fiber Types

Solution A and Solution B are spun from the left and right nozzles and mix on the drum (illustration)
Different solutions are spun from the left and right nozzles and mixed on the drum (illustration)
SEM image of a nonwoven made by spinning two solutions at once (x4,000)
Nonwoven made by spinning two solutions at once (SEM, x4,000)

Features of DNS-101

  • Simultaneous SpinningSpin Two Solutions at the Same Time

    Two independent pump-and-spinneret lines on the left and right. Set conditions for Solution A and Solution B separately and combine two fiber types in a single run.

  • A4 SizeA Nonwoven Equal to One A4 Sheet

    The φ100 mm drum collector with a 200 mm spinning width collects about 650 cm² (equal to one A4 sheet). Rotation speed is adjustable from 100 to 3000 rpm.

  • Temperature & HumidityQuick Recovery After Opening the Door

    Because the chamber space is small, it returns to its temperature and humidity within a short time, even after the door is opened and humid air gets in.

  • SafetyDesigned for Safe Operation

    A safety lock keeps high voltage off while the door is open, the door locks during spinning, and an emergency stop switch is provided. Filters collect exhaust gas and fibers.

System Configuration

Inside the DNS-101 chamber: syringe pumps, spinnerets, drum collector, light and nozzle cleaning mechanism
  1. 1Syringe Pumps ×2Feed rate 0.1–60.0 mL/hr. Each pump holds 1 to 3 syringes.
  2. 2Spinnerets ×2Clip type, up to 3 nozzles each. The Y and X axes move automatically; the Z axis is adjusted by hand.
  3. 3Drum Collectorφ100 mm, 200 mm spinning width. Rotates at 100–3000 rpm.
  4. 4Jet Observation LightLights the area near the nozzle tips, so you can watch the jet while finding the right conditions.
  5. 5Nozzle Tip Cleaning MechanismRemoves solution buildup at the nozzle tips during spinning, with the door kept closed.

Details

Spinnerets and drum collector
Spinnerets and drum collector
Spinneret with automatic Y and X axes
The Y and X axes move automatically
Touch panel for setting spinning conditions
Set conditions and operate on the touch panel

Main Specifications (Spinning & Collector)

Fiber diameter Approx. 10 nm to several µm (depends on the material)
Syringe pumps 2 units / feed rate 0.1–60.0 mL/hr
*The minimum feed rate depends on the syringe size.
Syringes 2.0 / 5.0 / 10.0 / 20.0 mL (1 to 3 per pump)
Dedicated adapters for 20 mL and 50 mL syringes (optional)
Spinnerets Clip type ×2 (up to 3 nozzles each)
Nozzles: injection needles 18–27G (15 mm long, flat-polished tip)
Travel range Y axis: ±100 mm (0–300 mm/s)
X axis (spinning distance): left −50 to −200 mm, right 50 to 200 mm (0–150 mm/s)
Z axis: +100 mm (manual)
High-voltage power supply HVU-40P100 ×2
0.0–40.0 kV each (minimum setting 0.1 kV)
Current display 0.0–100.0 µA
Collector Drum, φ100 mm, 200 mm spinning width
Collection area approx. 650 cm² (equal to one A4 sheet)
100–3000 rpm (31.4–942 m/min)
Operation Touch panel (setting conditions and operating), USB port

Main Specifications (System & Safety)

Chamber inner size 1700 (W) × 960 (D) × 700 (H) mm
External dimensions 1703 (W) × 1078 (D) × 1707 (H) mm
*Excluding signal tower, valves, control unit and handles
Weight 500 kg or less
Power supply AC 85–125 V 50/60 Hz or single-phase 170–250 V 50/60 Hz (select one)
Power consumption 1.5 kVA or less
Operating environment Temperature 20–30 °C / humidity 30–70% (no condensation)
Exhaust Airflow of 20 m³/h or more as a guide (connect the exhaust hose)
Safety functions Safety lock (high voltage and collector rotation do not work while the door is open)
Door lock (during standby and spinning)
Emergency stop switch
Signal tower: green = spinning / yellow = error / red = serious error

*Specifications and appearance are subject to change without notice.
*This product is intended for people who have expert knowledge of handling the product, its accessories and the chemicals used for spinning, and who can manage safety.

Talk to Our Electrospinning Specialists

Not sure whether DNS-101 fits your research? Tell us your materials and goal.
We will help you choose the right setup.

Quote

Get a price for DNS-101 with the options you need.

Online Meeting

Meet with us online to discuss your research and the right setup.

Sample Making

Consult us about making nanofiber samples to check the results before you buy.

Contact Us

Our specialist will reply by the next business day (Japan time).
You can also email us at askmecc@mecc.co.jp

Catalog / Specifications

Fill out the form below and the DNS-101 catalog (PDF) will be sent to your email right away.


    RequiredName



    RequiredE-mail



    RequiredOrganization



    RequiredCountry



    Phone



    City



    URL



    Comments/Requests