EQUIPMENT
NF-500
NF-500
Electrospinning system for lab use
The model NF-500 is an electrospinning system that spins large nanofiber samples and long sheets.
The high-end equipment integrates a 50kV high voltage supply and a solution heating spinneret.
Major features
- Spinning of a maximum of 500mm-long fiber sheets.
Productivity will increase with the use of multiple jet
spinnerets. - Integrating a 50kV high voltage supply.
A variety of nanofibers can be spun by the high output supply. - Solution heating spinneret creates much more nanofibers.
Solutions hard to be solved with solvents can be spun by
integrating this device. - Making aligned nanofibers.
High-quality aligned nanofiber sheets can be spun with
200mm-diameter and 200mm-wide drum collector. - Safety features thinking about operators’ use.
The NF-500 is equipped with safety devices such as highvoltage interlock, strengthened glass, door lock and exhaust
gas and fiber filters thinking about operators’ use.
Performance
* The effective width varies depending on the material.
| Model name | NF-500 |
|---|---|
| Purpose of use | Research and development |
| Typical nanofibers to spin | 500mm-wide nonwovens Aligned membrane Core/shell ・hollow nanofiber Tubular Fiber Long sheet |
| Standard collector | Plate |
| Optional collector | Drum φ100 w200（100 to 3000rpm） Drum φ200 w200（100 to 3000rpm） Drum φ200 w30（100 to 3000rpm） Drum φ200 w300（100 to 100rpm） Drum φ200 w600（100rpm） Disk（100 to 3000rpm） Mandrel （50 to 100rpm） Y-axis Slide(±25mm) Roll to roll 200/450/500mm-wide |
| Standard spinneret | Clip（100mm） |
| Optional spinneret | Vertical Clip Tubeless Coaxial MJS 4, 6, 8 holes Solution heating 11-syringe clip BNP（Bit Nozzle Pipe) Spinneret |
| Spinneret operation | Range of motion 600mm Traversing speed 0 to 300mm/s |
| Syringe pump | 2 built-in（To mount 3 syringes each） |
| Feed rate | 0.1 to 60ml/hr |
| Control | Touch panel |
| High voltage power supply | Voltage： 0.5 to 50.0kV Current： 0.0 to 100.0μA |
| Rotation speed of collectors | Drum; 100 to 3000rpm Disk; 100 to 3000rpm Mandrel; 50 to100rpm |
| Spinning distance | 50 to 300mm |
| Programmable parameter | ・High voltage output ・Feed rate of solutions from pump ・Collector rotation speed ・Up/down moving distance of slider (semi-automatic) ・Frequency and interval of cleaning ・Slider speed and distance |
| Inhaling and exhausting volume of fan | 60㎥/hr or more |
| Capacity of syringes | 2.0 / 5.0 / 10.0/ 20.0 (ml) |
| External dimensions (Except protrusions) | 1460W x 950D x 1903H (mm) |
| Weight | 700kg or less |
| Safety devices | ・Safety interlock ・Door lock ・Emergency stop button ・Signal tower ・Exhaust purification filter ・High speed shutoff of high-voltage output after POWER OFF ・High-voltage shutdown in case of overcurrent |
Components to be integrated
Plate Collector
Drum Collector
Mandrel Collector
Disk Collector
Y-axis Slide Collector
Roll to Roll Collector
Clip Spinneret
Vertical Clip Spinneret
Coaxial Spinneret
Tubeless Spinneret
11-syringe Clip Spinneret
Multiple Jet Spinneret (MJS)
BNP（Bit Nozzle Pipe) Spinneret
Solution Heating Spinneret
High voltage power supply
Catalog / specifications
After filling out the form below, the product catalog will be automatically sent to the registered email address.